You can test our solutions on a real hardware by using the following eval versions for different starter kits.

All kits include:

• EUROS RTOS (evaluation version): Complete set of features, generated applications stop execution after about 30 minutes and have to be restarted.
• EUROScope (time-limited license)
• EUROStrace (time-limited license)
• EUROS Embedded Studio ® (time-limited license)
• Toolset: Free GNU tools or evaluation versions of commercial tools

STMicroelectronics STM3210C-EVAL

Technical Features

• ARM Cortex-M3 core-based STM32F107VCT microcontroller.
• Peripherals: USB-OTG FS, ethernet, motor control, CAN, microSD CardTM, smartcard, USART, audio DAC, MEMS, EEPROM
• 2 GByte microSD Card™ or bigger
• 3.2” 240x320 TFT color LCD with touch screen
• Boot from user Flash, system memory or SRAM
• JTAG and trace debug support

STMicroelectronics STM32L476G-EVAL

Technical Features

• STM32L476ZGT6 microcontroller
• 4-Gbyte microSD card bundled
• 16-Mbit (1M x 16 bit) SRAM device
• 128-Mbit (8M x 16 bit) NOR Flash memory device
• 256-Mbit Quad-SPI Flash memory device with Double Transfer Rate (DTR) support
• Peripherals: USB-OTG FS, ethernet, motor control, CAN, microSD CardTM, smartcard, USART, audio DAC, MEMS, EEPROM
• JTAG/SWD, ETM trace debug support, user interface through USB virtual COM port, embedded ST-LINK/V2-1 debug and flashing facility
• LCD glass module daughterboard (MB979) with 40x8-segment LCD driven directly by STM32L476ZGT6
• 2.8-inch 320x240 dot-matrix color TFT LCD panel with resistive touchscreen

NXP S32K144EVB

Technical Features

• S32K144 MCU
• Arduino™ UNO footprint-compatible with expansion “shield” support
• Onboard connectivity for CAN, LIN, UART/SCI
• Integrating an SBC (UJA1169) and LIN phy (TJA1027)
• Easy access to the MCU I/O header pins for prototyping.
• Potentiometer, RGB LED, 2x push buttons and 2 touchpads
• Integrated open-standard serial and debug adapter (OpenSDA) with support for several industry-standard debug interfaces

NXP Kinetis ^® MK64FN1M0VDC12

Technical Features

• 120MHz , 121-XFBGA Arm® Cortex®-M4 Core
• 1MB Flash, 256KB SRAM,
• Onboard connectivity for CAN, LIN, UART/SCI, SPI, I2C, I2S, Ethernet
  GPIO, USB 2.0 On-The-Go

FM4-176L-S6E2CC-ETH

Technical Features

• 200MHz Arm® Cortex® MCU with DMA
• 675 CoreMark® MCU
• Single precision IEEE 754 compliant floating point unit
• 2MB flash, 256KB SRAM and 190 GPIOs.
• Communication interfaces: 10/100 Ethernet (IEEE 802.3),  USB host, USB device, CAN, LIN, High-Speed Quad SPI, I2S, I2C and UART.

Infineon XMC™4700

Technical Features

• ARM ® Cortex ®-M4 @ 144MHz
• 2048kB Flash, 352kB RAM
• Data and IP Protection on Flash
• 6 x CAN nodes
• EthernetMAC, USB-OTG, SD/MMC
• 6 channel USIC (configurable to SPI, UART, IIC, IIS)

XE167F-96F66F

Technical Features

• XE167F-96F66F CPU
• CPU Clock: 66 MHz
• On-Chip Memory:
  • 82 kByte SRAM
  • 768 kByte FLASH
• Communication interfaces: USB, LIN, CAN, SPI EEPROM
• JTAG interface (OCDS)